I don't know how common this is on your side of the pond but in my boat I have two pumps and taps in the galley,
one for fresh water from the tank and one for seawater from a through hull.
I was going to keep it as is for simplicity's sake but as my refit has become a complete renovation I started to think again.
Do you have sea water in the galley and for what do you use it?
With refit, I maintained my dual water pumps, figuring at sea a lot of general washing and rinsing can be done with saltwater, saving freshwater final rinsing.
Put a hole in my hull to let salt water in??? I don't think so!! ;D
Seriously. I had a salt water pump on the tri I lived aboard. Seldom used it. Along most of the eastern and gulf coast of the US barring the keys the waters are simply too muddy to be worth rinsing things in. So if I'm somewhere with clean saltwater i just use a bucket with a lanyard to dip what I need
By the way- my sink has no drain-- it gets lifted out and dumped overboard
Thanks!
I wouldn't add this feature if it wasn't there but as i is the question is if I should put in the work to remove it or keep it for the time being.
I asked the same question on a Swedish forum and other people tend to use seawater for doing the dishes, washing hands etc. so I will keep it for now and maybe remove it in the future when I feel confident enough to glass over holes in the hull below the water line.
If you have plenty of clean salt wateer it's handy. US east and gulf coast not zo much
Posted from Iphone underway in Gulf ICW. 200 miles west of New Orleans
"Mud! We used to dream of having muddy water!" (Monty Python referens).
My concern is that in the Baltic which will be my area for a few years, due to eutrophication
the annual algae bloom makes the water poisonous for a couple of months every year. People who swim get sick and dogs that drink it die.
The sea cock on this intake will be a safety feature in more then one way... :(
Mathilda has a sea water pump at the sink that connects through a ball valve and "T' to the engine intake strainer/though hull.
The ball valve gets shut before the engine is started.